INFORMATION FOR CUSTOMER
10
Service Support - M/C
Service Station Manual
Safe Riding Tips
• Always wear ISI mark helmets while driving or riding.
• Read thoroughly the instructions in this manual and follow them carefully.
• Avoid unnecessary accessories for the safety of both rider and other motorists.
• Get familiar and follow traffic rules and regulations in your states as well as general traffic signs.
• Do not overload your vehicle.
• Familiarize yourself well with starting, acceleration and braking of the vehicle.
• When applying the brakes, use both, the front and rear brakes. Applying only one brake
may cause the vehicle to lose control.
• During monsoon drive the vehicle more cautiously. Remember vehicles skid more easily during light showers.
• Always carry vehicle registration papers, insurance and a valid driving license with you.
MONSOON CARE : Fit & Finish Parts
• The appropriate surface preventive coat to be applied to avoid rusting on account of adverse atmospheric conditions.
• Clean & lubricate all the important parts as detailed in a periodic maintenance chart.
• Do not obstruct engine cooling by adding mud protection sheet from front.
• Vehicle cleaning to be done with soft & clean wet cloth to avoid scratches on painted parts.
• Do not apply direct water jet on painted, electrical / electronic parts.
Daily Safety Checks
Before riding the motorcycle be sure to check the following items. If any irregularities are found during these checks, refer
to the Maintenance chapter and see your dealer for the action required to return the motorcycle to a safe operating
condition.
Failure to perform these checks every day before you ride may result in serious damage or severe accident.
GENERAL INFORMATION
To Next Page
Loading...
Need help?
General
