EasyManua.ls Logo

Bajaj Storage Water Heater User Manual

Bajaj Storage Water Heater
8 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
bajaj electricals limited Page 1 of 8
KNOW YOUR
bajaj
Storage Water Heater
The Energy Efficient Range
Dear Customer,
Congratulations! You are now the proud owner of an Energy Efficient Bajaj Storage Water Heater, the most
durable, dependable and safe product in the market today. And we mean what we say.
Why? Because we at Bajaj understand your concern, your need for reassurance. So we designed our Storage Water
Heaters with one single minded objective - Safety. Total protection for you and your family, for years to come.
This manual will answer all your questions and remove your doubts. We have provided a detailed description of our
Storage Water Heaters and clear instructions for Installation and operation. Read this manual carefully, follow the
instructions and we guarantee you will never have to worry about your Storage Water Heaters again.
KNOW YOUR BAJAJ STORAGE WATER HEATER
How does It function?
1. Every Bajaj Storage Water heater unit is made of
a. an outer body, inner tank, heating element
b. safety devices like Safety valve, Thermostat, Thermal cut-out, Fusible plugs and
c. Thermal insulation to retain heat.
2. Water comes into the inner tank through the inlet pipe at normal working pressure of about 30 P.S.I.
3. When the tank is full (this becomes clear when water starts flowing through the outlet) close the outlet and
switch ON the power supply.
4. The heating element heats up the water to a pre-fixed temperature. At this point the Thermostat
automatically switches OFF the power supply to the unit which is indicated by the switching OFF of green
lamp.
5. You can now take the water out through the outlet. Because of the design of the heater & displacement
principle, fresh cold water keeps entering through the inlet.
6. As temperature of water inside the tank drops, the Thermostat again switches ON the power supply to the
heater. When this happens, water starts heating up again. This process continues till you switch OFF the
main power supply to the heater after usage.
7. Since it takes a longer time for the water to heat up in storage water heater. it is advisable to switch ON the
power supply to the unit well in advance of the actual usage.
8. During normal functioning, red lamp does not glow. In case it glows, call the nearest Bajaj Sales and Service
Centre as it indicates that thermostat may be defective.

Other manuals for Bajaj Storage Water Heater

Question and Answer IconNeed help?

Do you have a question about the Bajaj Storage Water Heater and is the answer not in the manual?

Bajaj Storage Water Heater Specifications

General IconGeneral
TypeStorage
Rated Voltage230V
Rated Frequency50 Hz
Rated Pressure8 bar
Power Consumption2000W
Warranty2 years
Safety FeaturesThermal Cut-out, Pressure Relief Valve
Capacity15 liters

Summary

How Does It Function?

How Is It Made?

Inner Tank Material

Made from 99.5% pure electrolytic extra thick copper with reinforced welding.

Heating Element

Extra long, direct immersion type, mineral filled, housed in a copper tube.

Insulation Features

Resin bonded extra thick fibre glass wool pad for optimum heat retention.

Safety Systems

Safety Valve Function

Operates when internal pressure exceeds 50 P.S.I.

Thermostat Control

Stem type automatic temperature control, set to operate at 60°C.

Thermal Cut-Out Protection

Bimetallic device operating at 90°C to prevent dry heating.

Fusible Plug Mechanism

Melts to release hot water/steam if other safety devices fail.

Vent Pipe Purpose

Provides extra protection; can be extended for safety.

Product Benefits

Two-Year Guarantee

Offers a standard two-year guarantee on the product.

Usage Versatility

Suitable for both multi-point and single point usage.

Installation and Operation Guide

Water Supply Considerations

Details on connecting to municipal supply or water tanks.

Water Connections

Wiring and Accessories

Pressure Reducing Valve

Used when inlet water pressure exceeds 30 P.S.I.

Dead Weight Valve

Prevents excess pressure build-up, used with other valves.

Vacuum Relief Valve

Prevents tank collapse due to vacuum in low-pressure conditions.

Operation Process

Operating Instructions

Step-by-step guide for filling, switching on, and using the heater.

Installation Charts & Mounting Conversion

Precautions

Don'ts