EasyManua.ls Logo

BALAY GT2BY53NL - User Manual

BALAY GT2BY53NL
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Cod:
B/S/H Electrodomésticos España S.A.
Itaroa, 1
31620 Huarte (Pamplona)
Operating instructions
nwijzing
a
en
Gebruiksa
nl
(España)
Servicio al
Cliente
www.balay.es
www.balay.pt
(Portugal)
9000193451 E
902 351 352
214 250 700

Questions and Answers

  • J
    jennifer41Jul 30, 2025
    What to do if my kitchen smells of gas from the BALAY GT2BY53NL Hob?
    • P
      patrickjonathanJul 30, 2025
      If you smell gas in the kitchen, it could be due to a valve being left open or a leak in the gas bottle coupling. Make sure all the valves are closed and check the gas bottle coupling to ensure it is properly connected.
  • S
    Shannon ProctorAug 4, 2025
    What to do if none of the electrical system works on my BALAY GT2BY53NL Hob?
    • K
      Kevin BurnettAug 4, 2025
      If the electrical system isn't working, it might be due to a faulty fuse or a triggered circuit breaker. Check the fuse in the main fuse box and replace it if necessary. Also, check the mains supply box for triggered circuit breakers.
  • J
    Jennifer WardAug 9, 2025
    Why is the gas flow not normal on my BALAY Hob?
    • S
      stephengravesAug 9, 2025
      If the gas flow isn't normal, it could be because the gas flow has been cut at an intermediate stopcock, or if you're using a gas bottle, it might be empty. Open any intermediate stopcocks. If you're using a gas bottle, replace it with a full one.
  • M
    Mrs. Lisa WalterAug 14, 2025
    Why is the flame on the burners not evenly distributed on my BALAY Hob?
    • C
      Carol BlairAug 14, 2025
      Uneven flame distribution may be caused by burner components not properly assembled or dirty gas outlets. Ensure all burner components are correctly positioned. Clean the gas outlets on the burners.
  • K
    Kathy JohnsonAug 19, 2025
    What to do if the electric ignition system does not work on my BALAY GT2BY53NL Hob?
    • B
      Barbara HaleyAug 19, 2025
      If the electric ignition system isn't working, there might be food or cleaning product particles between the spark plugs and the burners, the burners might be wet, or the covers on the burners might not be in the right position. To resolve this: - Carefully clean the gap between the spark plug and the burner. - Dry the burner covers and spark plugs thoroughly. - Check that the covers are positioned correctly.
  • R
    Rachel LongAug 25, 2025
    What to do if the safety devices on the different burners do not work on my BALAY Hob?
    • E
      egillespieAug 25, 2025
      If the safety devices aren't working, it could be because the control knob hasn't been pressed long enough or the outlets on the burners are dirty. Once ignited, keep the control knob pressed in for a few seconds. Also, clean the gas outlets on the burners.

Summary

Safety Warnings

Your New Hob

Gas Burners

Recommended Receptacle Diameters

Additional Pan Support

Details about optional pan supports for specific burners like the triple-flame burner.

Cooking Recommendations

Electric Plates

Electric Plates with Continuous Energy Setting

Electric Plates with Conventional Knobs

Cooking Warnings

Cleaning and Maintenance

Troubleshooting

Conditions of Warranty

BALAY GT2BY53NL Specifications

General IconGeneral
BrandBALAY
ModelGT2BY53NL
CategoryHob
LanguageEnglish

Related product manuals