Need help?Do you have a question about the Balboa spaTouch series and is the answer not in the manual?
General| Brand | Balboa |
|---|---|
| Model | spaTouch series |
| Category | Control Panel |
| Language | English |
Provides an overview of information displayed on the main screen.
Details the meaning and function of various icons on the screen.
Explains how to navigate through the menu structure on the screen.
Describes how waiting messages are indicated and accessed on the screen.
Explains how to adjust the set temperature using up/down buttons.
Describes how holding the buttons affects temperature changes.
Describes how to control individual spa devices from the Spa Screen.
Explains how to increase or decrease values using arrow buttons.
Describes the function of the invert screen option.
Explains how to navigate back or save changes on different screens.
Describes how to move between screens using right/left and up/down arrows.
Explains that the Settings Screen controls programming and spa behaviors.
Details how to control heat mode and set dual temperature ranges.
Compares Ready Mode and Rest Mode for spa heating and circulation.
Describes the specific Ready-in-Rest Mode functionality.
Instructions for filling the spa and preparing for operation.
Explains the priming mode and its purpose during initial startup.
Details the steps for priming the spa pumps correctly.
Describes how to exit the priming mode manually or automatically.
Explains how to operate pumps and describes circulation modes.
Details filtration cycles and ozone generator operation.
Describes how the system protects against freezing conditions.
Explains the optional clean-up cycle feature.
Explains the importance and method for setting the time.
Details how to set start time and duration for filter cycles.
Explains how to enable and configure a second filter cycle.
Describes different modes for circulation pumps.
Explains the purpose and timing of purge cycles.
Clarifies the function and behavior of filter cycles.
Explains how to enable and configure the spa light timer.
Describes how auxiliary panels operate with specific buttons.
Explains how to disable pumps for service functions.
Describes the feature for draining water using Pump 1.
Allows changing temperature display and time format.
Explains how to enable or disable maintenance reminder messages.
Explains how to set the duration for post-use cleanup cycles.
Describes how to change the display language on the panel.
Explains how to lock the panel to prevent unwanted adjustments.
Describes how to lock/unlock specific settings.
Allows setting the sleep timer for the panel display.
Explains the demonstration mode for spa features.
Describes how to review recorded system faults.
Explains the Ground Fault Circuit Interrupter test procedure.
Provides checks for low water level, suction restrictions, and other flow issues.
Covers communication errors and test software status.
Lists common maintenance tasks like checking pH, sanitizer, and filter.
Covers reminders for cleaning covers, treating wood, and changing filters.
Includes reminders for UV, ozone checks, and service check-ups.
Covers wiring, grounding, and torque specifications for installation.
Details safety precautions and compliance requirements for installation.
To Next Page
