Balboa TP500S User Manual

42339 rev A1 03/06/20
1
Manufactured under one or more of these patents. U.S. Patents: 5332944, 5361215, 5550753, 5559720, 5,883,459, 6253227, 6282370, 6590188, 6976052,
6965815, 7030343, 7,417,834 b2, Canadian Patent: 2342614, Australian patent: 2373248 other patents both foreign and domestic applied for and pending. All
material copyright of Balboa Water Group.
TP500 and TP500S Control Panels
User Guide for Standard Menu
System Model: All BP series systems
Panel Model: TP500 and TP500S Series
Panel Software Version: All versions
Display Icons
A B C D E F G H I J K
O
N
M
L
A - Heat
B - Ready Mode
C - Rest Mode
D - bba™2 On
E - WiFi (Cloud Connection)
MicroSilk® is a registered trademark of Jason International.
F - Light
G - Cleanup Cycle
H - Jets 1
I - Jets 2
J - Blower
K - Auxiliary (Jets 3 or )
L - Temperature Range (High / Low)
M - Set (Programming)
N - Filter Cycle (1 or 2 or Both)
O - AM or PM (Time)
TP500S
TP500

Balboa TP500S Specifications

General

Brand	Balboa
Model	TP500S
Category	Control Panel
Language	English

Summary

TP500 and TP500S Control Panels

Filling and Priming the Spa

Preparation and Filling Process

Priming Mode Operation

Explains the priming mode, its duration, and how pumps are activated.

Spa Behavior and Modes

Pump Operation Modes

Freeze Protection System

Describes how the spa protects itself from freezing conditions.

Temperature Settings and Ranges

Adjusting Set Temperature

How to adjust the desired water temperature using the control panel buttons.

Dual Temperature Range Selection

Explains the system's ability to use two independent temperature ranges.

Spa Mode Selection

Ready Mode vs. Rest Mode

Differentiates between Ready Mode for constant temperature and Rest Mode for timed heating.

Restricting Panel Operation

Locking Panel Functions

How to lock the control panel to prevent unauthorized use or temperature adjustments.

Unlocking the Control Panel

Filtration Cycle Configuration

Setting Main Filtration Cycles

How to set start times and durations for the primary filtration cycles.

System Preferences Menu

Temperature and Time Display Settings

Utilities and System Information

Accessing System Information (INFO)

How to view system settings like Software ID, Model, and Setup Number.

Information on Heater and Switches

GFCI Test Procedure

Understanding the GFCI Test Feature

Explains the GFCI test, its importance, and automatic tripping.

Forcing the GFCI Trip Test

How to manually initiate the GFCI trip test for verification.

Fault Log Review

Accessing and Interpreting the Fault Log

How to view recorded fault messages, days since fault, and temperature data.

General System Messages

Priming Mode and Temperature Status

Freeze Protection and Warnings

Details on freeze protection activation and specific warnings like J29.

Heater-Related Messages

Flow Reduction and Failure Alerts

Explains messages related to low or failed water flow to the heater.

Dry Heater and Overheat Alerts

Describes messages for dry heater conditions and excessive heater temperature.

System-Related Error Messages

Memory and Configuration Errors

Explains messages related to memory failures, clock errors, and configuration issues.

GFCI and Startup Failures

Installation and Safety Guidelines

Basic Installation and Configuration

Guidelines for electrical connections, grounding, and enclosure requirements.

Crucial Safety Warnings

Important warnings regarding water temperature, exercise, immersion, and water chemistry.

Service and Technician Requirements

Emphasizes that only qualified technicians should perform service.