Need help?Do you have a question about the Balboa TP200 PANEL and is the answer not in the manual?
General| Brand | Balboa |
|---|---|
| Model | TP200 PANEL |
| Category | Control Panel |
| Language | English |
Explains how the TEMP button initiates actions and navigates menus for settings.
Details the LIGHT button's role in navigating menus and saving settings.
Defines the meaning of red and blue characters and solid/hollow dots on the display.
Describes the Main Screen, Set Temperature display, and how they change.
Explains the purpose and operation of the TEMP, LIGHT, JETS, and AUX buttons.
Guides users on how to navigate through the spa's main menus and sequences.
Covers how to invert the display and access filter cycle settings.
Details how to adjust the spa's set temperature using available buttons.
Explains the procedure to invert the spa panel's display orientation.
Describes the press-and-hold method for continuous temperature adjustment.
Explains filter cycle frequency, duration adjustment, and purge cycles.
Describes how secondary pumps or blowers run briefly at the start of filter cycles.
Details the operation of filtration, ozone, and optional clean-up cycles.
Explains how freeze protection activates pumps and the basic pump operation.
Describes the three modes for circulation pumps and the role of the heater pump.
Explains Ready Mode for consistent temperature maintenance.
Details Rest Mode, which only heats during filter cycles.
Describes the temporary switch from Rest to Ready mode activated by the JETS button.
Guides on filling the spa and preparing plumbing for pump operation.
Explains the purpose and duration of Priming Mode for removing air from pumps.
Provides instructions on how to manually prime pumps and identify the heater pump.
Covers messages like priming mode, unknown temperature, freeze protection, and low water level.
Explains messages related to high water temperature and system warnings like J29.
Provides a list of checks to ensure proper water flow for spa operation.
Explains messages indicating the heater may be dry or is dry.
Covers messages related to low water flow, flow failure, and overheating of the heater.
Describes messages indicating temperature sensors are out of sync or unbalanced.
Explains messages that indicate a failure in sensor A or sensor B.
Covers messages like "NO COMM" and the display showing "°T" for Test Mode.
Explains messages related to memory failure, persistent memory reset, and clock errors.
Details messages indicating configuration errors preventing the spa from starting up.
Introduces reminder messages for spa maintenance and how they appear.
Lists reminders for checking pH, sanitizer chemicals, and cleaning the water filter.
Covers testing the GFCI and reminders for changing cartridges, water, and filters.
Includes reminders for checking ozone/UV, service checks, and cleaning the spa cover.
Provides essential guidelines for installing the spa control system.
Emphasizes GFCI/RCD protection and general shock hazard warnings.
Lists warnings regarding health, exercise, water chemistry, and equipment placement.
Lists registered trademarks, patents, and intellectual property notices.
Details intellectual property rights and states specifications are subject to change.
Provides contact details for Balboa Water Group's corporate and regional offices.
To Next Page
