TP200 USER GUIDE 42375 Rev A1
24
23
Balboa Water Group | Your Single Source Solution
No Communications.
The panel is not receiving communication from the control system.
Contact your dealer or service organization.
°F or °C is replaced by °T.
The Control System is in Test Mode.
Contact your dealer or service organization.
Control System PanelNo Communications Panel Cable
PANEL MESSAGES
MISCELLANEOUS
Memory Failure - Checksum Error. *
At Power-Up, the system has failed the Program Checksum
Test. This indicates a problem with the firmware (operation
program). Contact your dealer or service organization.
Memory Warning - Persistent Memory Reset. *
Appears after any system setup change. Contact your dealer
or service organization if this message appears on more
than one power-up, or if it appears after the system has been
running normally for a period of time.
Clock Error. *
The clock that keeps track of time when the spa is powered O
has failed. Contact your dealer or service organization.
Note: Not Applicable on some control systems.
Configuration Error – Spa will not Start Up.
Contact your dealer or service organization.
PANEL MESSAGES
CONTROL SYSTEM RELATED
* This message can be reset from the panel with any button press.
To Next Page
Loading...
