To Next PageTo Next Page
Need help?Do you have a question about the Balboa GL Series and is the answer not in the manual?
General| Series | GL Series |
|---|---|
| Category | Control Panel |
| Frequency | 50/60 Hz |
| Display | LCD |
| Certifications | UL |
| Voltage | 120/240V AC |
Explains how to navigate menus using panel buttons and keys.
Instructions for setting the spa's current time and temperature.
Overview of the physical buttons and indicator lights on the panel.
Details the operation of Jets 1, Jets 2, and Blower buttons.
Provides quick access to system setup and status via dedicated keys.
Controls for spa equipment like jets, blower, and lights.
Configuring and programming spa equipment settings via the Set menu.
Describes three ways the Light button operates depending on spa configuration.
Setting up automatic spa filtration cycles with start and end times.
Customizing the functions assigned to the Fast Keys menu.
Selecting heating modes (Standard, Economy, Sleep) for the spa.
Instructions for setting and adjusting the spa's current time.
Adjusting temperature format, time format, and reminder settings.
Adjusting the LCD contrast of the spa control panel.
Viewing sensor temperatures and switch bank status.
Displaying system and panel version information for technical support.
Action required for overheat conditions in the heater or spa water.
Troubleshooting steps for freeze conditions and sensor failures.
Addressing low flow, heater flow low, and dry heater messages.
Explanation of priming mode and unknown temperature displays.
Operating in standby mode and addressing pH level warnings.
Addressing low/high sanitizer levels and drain water procedures.
Troubleshooting hardware failures, memory issues, and configuration errors.
List of periodic tasks like checking pH, sanitizer, and filters.
Guidance on testing and resetting the GFCI protection feature.
Operation of optional auxiliary panels for jets, mister, and TV lift.
Using the stir function to mix chemicals after adding them.
Guidelines for wiring, torque, and GFCI protection during installation.
Information on CSA compliance, water temperature, and electrical safety.
Warnings regarding exercise, water chemistry, and proximity to water.
