To Next PageTo Next Page
Need help?Do you have a question about the Balboa ML900 and is the answer not in the manual?
General| Model | ML900 |
|---|---|
| Category | Control Panel |
| Control Type | Digital |
| Heater Control | Yes |
| Light Control | Yes |
| Water Temp Sensor | Yes |
| High Limit Sensor | Yes |
| Filtration Cycle | Programmable |
Initial steps for spa power-up and pump priming sequence.
Explanation of icons displayed on the control panel for various functions.
Instructions for setting the spa's current time and date.
How to view and adjust the spa's set temperature using Warm/Cool buttons.
Guide to switching between Standard, Economy, and Sleep modes.
Explanation of how to activate and exit Standby Mode.
Operation of Jets 1, Jets 2, and Jets 3 pumps, including speed control.
How to operate the blower and invert the display for readability.
Details on preset filter cycles and optional programming for cycle times.
How to operate spa lights, fiber optics, and optional equipment.
Automatic activation of pumps and blower to prevent freezing.
Steps to lock the control panel or set temperature to prevent changes.
Information on clean-up cycles and different circ pump operating modes.
Details on ozone generator use and accessing system information like software version.
Guide to customizing spa settings like reminders, temperature units, and time format.
Lists common error messages, their meanings, and required actions.
Overview of routine maintenance reminders and how to manage them.
Introduction to optional control panels and their functions.
Essential safety precautions and installation requirements for the spa controller.
