14 OPTIONAL ACCESSORIES
14.1 Auxiliary Heat Sink (Catalog No. BC143) – Doubles the horsepower rating of the control.
14.2 Barrier Terminal Board (Catalog No. BC147) – Converts the quick-connect terminals of the control to a
barrier terminal block. Contains PC board mounted line and armature fuse holders (fuses supplied separate-
ly). Plugs onto the quick-connect terminals of the control.
14.3 Signal Isolator (Catalog No. BC152) – Provides isolation between non-isolated signal sources and the
control. Plugs onto the quick-connect terminals of the control.
14.4 Dial Plate and Knob Kit (Catalog No. BC149) – Provides indication of the Main Speed Potentiometer
position (0 - 100 %).
14.5 DIN Rail Mounting Kit (Catalog No. BC218)
14.6 Current Sensing Overload Protector (Catalog No. BC146) – Provides overload current sensing and pro-
tection of DC motors and speed controls rated 1/8 - 3 HP by sensing armature current. Operates on 115 or
230 Volt AC line input.
14.7 Electronic Potentiometer (Catalog No. BC151) – Provides digital type control of motor speed. Replaces a
standard rotary potentiometer with a set of customer supplied momentary push buttons or membrane
switches. Operates on 115 or 230 Volt AC line input.
14.8 RFI Filter (Catalog No. BC24-LF) – Provides RFI and EMI suppression. Rated 24 Amps at 230 Volts AC,
50/60 Hz. Complies with CE Directive 89/336/EEC (EN55022 and/or EN55011) relating to the EMC Class A
Industrial Standard. Remote mountable.
30
To Next Page
Loading...
