EasyManuals Logo

Baldor Series 10 User Manual

Baldor Series 10
74 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
General Information 1-3
WARNING: Be sure the system is properly grounded
before applying power. Do not apply AC
power before you ensure that all grounding
instructions have been followed. Electrical
shock can cause serious or fatal injury.
WARNING: Do not remove cover for at least five (5)
minutes after AC power is disconnected to
allow capacitors to discharge. Dangerous
voltages are present inside the equipment.
Electrical shock can cause serious or fatal
injury.
WARNING: Improper operation of control may cause
violent motion of the motor shaft and driven
equipment. Be certain that unexpected
motor shaft movement will not cause injury
to personnel or damage to equipment. Peak
torque of several times the rated motor
torque can occur during control failure.
WARNING: Motor circuit may have high voltage present
whenever AC power is applied, even when
motor is not rotating. Electrical shock can
cause serious or fatal injury.
WARNING: This unit has an automatic restart feature
that will start the motor whenever input
power is applied and a RUN (FWD or REV)
command is issued and maintained. If an
automatic restart of the motor could cause
injury to personnel, the automatic restart
feature should be disabled by changing the
AUTORESTART parameter 82 to MANUAL.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Baldor Series 10 and is the answer not in the manual?

Baldor Series 10 Specifications

General IconGeneral
BrandBaldor
ModelSeries 10
CategoryInverter
LanguageEnglish

Related product manuals