BALDR B0367STHR - Projection Function; Backlight Function; Temperature and Humidity

EN
Slide the switch on the back of unit to turn on/off projection.
●
Press the button to reverse the projection data with 90 degree
from 0°→90°→180°→270°→0°
●
PROJECTION FUNCTION
TEMPERATURE&HUMIDITY
Press and hold the button to switch the brightness of the
projection.
●
Press and hold the “▲/C/F” button to switch the projection data
between time and temperature.
●
Slide the “focus” switch on the back of unit to adjust the focus of
projection.
●
Press “ ”button to turn on the backlight.
●
Press “ ” button to switch backlight brightness among 100%,
50% and off.
●
BACKLIGHT FUNCTION
Indoor temperature display range :0°C~50°C (32°F ~122°F).,LL.L
or HH.H will display when out of range
●
Indoor humidity range:1%-99%,1% or 99% will display when out
of range
●
Accuracy: For temperature between 0℃~50℃,the accuracy
is±1 ℃; For humidity between 40-70%RH,the accuracy
is±5%RH,if out of this range,the accuracy will be±8%RH.
Remark:The reading will be more accurate standing still for half an
hour after power on.
●
13