Balex BXT 3210 E - Starting the Mower; Mowing Procedure

21
ENGLISH EN
Starting (Fig. 3)
CAUTION! Do not start the mower if it is
standing in long grass.
1. Press the safety button (A) of the
switch assembly and then pull the
switch lever (B) against the bar.
2. Keep the switch lever held whilst
releasing the safety button.
3. To stop the mower release the switch
lever and it automatically returns to its
o󰀨 position.
3
Mowing
(Fig. 4a/4b)
We recommend to use your mower as outhined in this section in order to achieve optimun
results and to reduce the risk of cutting the mains cable.
• Place the bulk of the mains cable on the close to the starting point.
• Switch the mower on as described above.
• Proceed as shown in Fig. 4.
• Move from position 1 to position 2.
• Turn right and proceed towards position 3.
• Turn left and move towards position 4.
• Repeat the above procedures as required.
WARNING! Do not work towards the cable.
4