Balex BXT 3210 E - Maintenance and Storage; Blade Maintenance; Cleaning and Winter Storage

22
ENGLISH EN
Blade maintenance (Fig. 5)
• Regularly remove grass and dirt from the blade.
• At the beginning of the gardening season, carefully examine the condition of the blade.
• If the blade is very blunt, sharpen or replace the blade.
• If the blade is damaged or worn, t a new blade.
WARNING! Observe the following precautions:
• Disconnect the mower from the mains and wait until the blade has stopped rotaing
before proceeding.
• Be careful not to cut yourself. Use heavy-duty gloves or a cloth to grip the blade.
• Only use the speciled replacement blade.
• Do not remove the impeller for any reason.
REPLACING THE BLADE
• Turn the mower onto its side.
• Place bushing into shaft of
motor.
• Place blade, at pad and spring
washer alignly.
• Place blade screw into the
holes.
• Tighten blade screw with sleeve.
5
5. Maintenance and storage
Cleaning
NOTE: Disconnect electricity by unplugging cable at the socket before
proceeding. ATTENTION: Keep hands clear of moving blade.
• Clean mower thoroughly after each mowing with cloth or brush.
• Do not spray with water.
Winter storage
• Clean mower thoroughly before storing away.
• Have your mower thoroughly checked once a year by an authorized service center.
• Do not store it in a wet or humid place.
• Keep all nuts, bolts, and screws tight to be sure the appliance is in safe working condition.
• Check the grass catcher frequently for wear or deterioration.
• Replace worn or damaged parts for safety.