Bally 6000 Pro Series

To Next Page

General Instructions for

Bally 6000 Slot Machines

If you are wondering if this is the same slot machine that you might find in your local

Casino, the answer is basically yes. I say basically in that we have gone to great lengths

to convert this wonderful Bally 60000 Pro Series Slot Machine into a machine that is

appropriate and legal for home use. We have modified the software to make it more

“User Friendly”. In many cases we have also changed the battery back up system to

compensate for the fact that these machines will probably not be on 24 hours a day as

they are in a Casino.

The next question many people ask is “Isn’t this machine illegal”? The answer basically

depends on where you live. In the states of Alaska, Arizona, Kentucky, Maine,

Minnesota, Nevada, Ohio, Rhode Island, Texas, Utah, Virginia and West Virginia

residents are permitted to own any slot machine for non-gambling purposes. In many

other states, age of the machine determines legality of home ownership for machines

that take in or pay out money. For these States we offer Free Play and convertible Free

Play machines. Most states have “better things to do with their time than to go around

checking the manufactured date on some little old lady’s piggy bank.“ I do not know

about all states, but the State of Michigan has NEVER prosecuted a homeowner for

simply having a slot machine that is less than 25 years of age. However, they have and

will prosecute gambling regardless of the age of the machine. In all Jurisdictions

(states) the use of an unlicenced slot machine for gambling purposes is strictly

prohibited.

OK now that we have the legal stuff out of the way, how do I make it work?

First you will need a sturdy base. A normal slot base is about 21" high by 18" deep by

24" wide and capable of supporting about 300 pounds. You can make your own or you

could purchase a custom Oak Cabinet, cost up to $800. In reality you will probably want

to do something in between. Just make sure the machine is securely attached to the

base and that the base is stable.

Unlock and open the door with the key supplied. Route the AC line cord out the hole in

the bottom toward the rear of the machine.

Mount the Slot machine securely to the stand via the mounting holes located in the base

of the machine.

Plug in the line cord into a switched 120 volt power strip. Turn on the power switch. Close

and lock the door. The machine can now be turned on or off via the switch on the power

strip.

Need help?

Do you have a question about the Bally 6000 Pro Series and is the answer not in the manual?

Summary

Initial Setup and Operation

Prepare Machine Base

Ensure a stable and secure base for the slot machine, capable of supporting approximately 300 pounds.

Connect and Power On

Route power cord, mount machine securely, plug into switched power strip, and turn on.

Maintenance Procedures

Battery Replacement and Reset

Replace low-battery error code 81 by changing AA batteries and performing a hard reset.

Performing a Hard Reset

Hard Reset Steps

Detailed instructions on how to perform a hard reset using DIP switch DS1 and specific buttons.

Troubleshooting Common Errors

Understanding Exception Codes

Lists and explains common Bally S6000 exception codes and their meanings.

Resolving Specific Faults

Guidance on clearing errors related to coin entry, hoppers, reels, doors, and power.

The Bally 6000 Pro Series Slot Machine, as described in this manual, is a modified casino slot machine adapted for home use. While retaining the core functionality of its casino counterpart, it has undergone significant changes to ensure it is "User Friendly" and compliant with home ownership regulations in various jurisdictions.

Function Description

The primary function of the Bally 6000 is to simulate the experience of playing a casino slot machine without physical payouts. When powered on, the reels spin slowly, and the "Insert coin" light illuminates. Users can initiate play by inserting a dollar bill into the bill head or by pressing a "free play" button (if installed). Inserting a dollar bill grants between 1 and 100 credits, with a factory setting of 4 credits per dollar. Pressing the free play button simulates a coin drop, lighting the "Spin" button. Once credits are available, users can pull the handle or press the "Spin" button to play. The machine operates exactly like a casino slot, but without dispensing physical money.

The legality of owning such a machine varies by state. In Alaska, Arizona, Kentucky, Maine, Minnesota, Nevada, Ohio, Rhode Island, Texas, Utah, Virginia, and West Virginia, residents are permitted to own slot machines for non-gambling purposes. In other states, legality may depend on the machine's age. For these states, "Free Play" and "convertible Free Play" machines are offered, which do not pay out money. The manual explicitly states that the use of an unlicensed slot machine for gambling purposes is strictly prohibited in all jurisdictions.

Important Technical Specifications

The machine is designed to be mounted on a sturdy base. A normal slot base is approximately 21 inches high, 18 inches deep, and 24 inches wide, capable of supporting about 300 pounds. The machine itself is secured to the stand via mounting holes in its base.

A key modification for home use involves the battery backup system. Casino machines are designed to operate 24/7, but home use often involves extended periods of being powered off. To compensate for this, the original 3.6V Lithium battery (which typically lasts 7-9 years in a casino setting but only 1-2 years in home use due to continuous CMOS power draw) has been replaced with a special battery kit that uses low-cost AA alkaline batteries. This modification addresses the common "error code 81, Low Battery" issue. Rechargeable batteries are explicitly stated as incompatible.

Power is supplied via a switched 120-volt power strip, with the AC line cord routed through a hole in the bottom rear of the machine. The machine can be turned on or off using the power strip's switch after the main power switch is engaged and the door is closed and locked.

Usage Features

Starting the Machine:

Securely mount the machine to a stable base.
Unlock and open the main door using the provided key.
Route the AC line cord through the bottom rear hole.
Plug the line cord into a switched 120-volt power strip.
Turn on the machine's internal power switch.
Close and lock the main door.
Turn on the power strip switch.

Playing the Machine: Once powered on, the reels will spin slowly, and the "Insert coin" light will illuminate.

Free Play: Press the free play button (if installed). This simulates a coin drop, and the "Spin" button will light.
Bill Insertion: Insert a dollar bill into the bill head. The machine will grant 1 to 100 credits (factory default: 4 credits per dollar).
Initiating a Game: After credits are available, pull the handle or push the "Spin" button.
Betting: Use the "bet button" or "Max Bet button" to place wagers.

Jackpot Reset: In cases where the machine "locks up" and plays "Happy Music" due to a jackpot or payout exceeding the set maximum coin amount, a Jackpot Reset Key is provided. This key is inserted into the top keyhole on the right side of the machine, turned clockwise, released, and removed. This action stops the music and restores the "insert coin" light, allowing play to resume. Users are cautioned against using this key for purposes other than home use, as casino security takes a dim view of customers using such keys for internal register access or diagnostics.

Maintenance Features

Battery Replacement (Addressing Error Code 81 - Low Battery): The most common issue for home users is "error code 81, Low Battery," due to the machine being off for extended periods. The modified battery system uses AA alkaline batteries, making replacement straightforward:

Open the main door.
Turn off power and unplug the machine.
Pull out the CPU tray (located under the Reel Shelf).
Remove the old batteries.
Insert fresh AA alkaline batteries into the holder, ensuring correct polarity. (Do not use rechargeable batteries).
Perform a "Hard Reset" to load default data into the CMOS.

Performing a Hard Reset: A "Hard Reset" is necessary after battery replacement or changing DIP switch settings. Rec Room Specialties Pro Series slots have software designed for home use, eliminating the need for special reset chips.

Turn off the power.
Remove the CPU tray and hold it with the front facing you.
Locate DIP switch DS1 (left edge, center).
Turn ON Switch 8 on DS1 (closest to JW5, ON is to the right).
Reinstall the CPU Tray.
Push and hold the test and pseudo coin buttons on the front of the CPU Tray.
While holding both buttons, turn on the power.
Continue holding the buttons until the display shows "CHC" then "CLC" and all lights flash. This is also an opportunity to check for burned-out bulbs.
Release the buttons.
Turn off the power, remove the CPU Tray, turn OFF Switch 8 on DS1, and reinstall the CPU Tray.
Turn on the power. The reels will slowly turn and align to "Zero," followed by a dynamic tuning algorithm ("bumps").
After the bumps stop, the machine enters date and time setting mode. Users can set these or simply press the far left (change) button to make the machine ready to play.

Troubleshooting (Bally S6000 Exception Codes): The machine indicates faults via error codes displayed on the front door.

"20" series codes (20-24): Refer to coin entry problems (jams, inappropriate coins, reverse). To clear, open the main door, clear the jam, and close the door. Error 24 can be caused by a dirty prism behind the coin comparitor (coinless machines lack this).
"30" series codes (30-33): Refer to Hopper problems (overpay, jam, empty, reset during payout). Never unplug components with power on, especially the Hopper and CPU Board. Insufficient coins or missing hopper/simulator can cause code 31. Free Play and "Dino" machines do not have hoppers.
"40" series codes (41-44): Rare, related to reel issues (unplugged reel, binding object, dirt, untuned reel). Clean reel optics and perform a hard reset. If persistent, interchange reels to isolate the fault. If the problem remains with the reel, the motor may be defective or a connector loose. Turn off power before checking connectors, especially on the motherboard.
"50" series codes (50-52): Door-related issues. Code 50 indicates door closed optics are not making (door open). Code 52 indicates the cash can is not properly seated or the stacker door is not closed.
"70" series codes (70-74): Reel movement errors, often caused by accidentally hitting a reel. Open and close the door to clear.
"80" series codes (80-83): System errors. Code 80 (ROM Checksum Error), 81 (Battery Voltage Low - most common, addressed by battery replacement), 83 (Safe RAM Error).
"No Code": If lights are on but nothing shows on the front door, and no error codes or "insert coin" light, the most common cause is the main power supply. This assembly is located behind the hopper in the lower center of the back cabinet and can be returned to the dealer for exchange.
Bill Validator/Coin Mech Off: If the machine fails to work without indicating anything, check if the coin mech switch on the front of the CPU tray is in the down (off) position.