baltur BTL 20 - User Manual

BRUCIATORI DI GASOLIO MONOSTADIO
SINGLE-STAGE DIESEL BURNERS
ITALIANO
Manuale istruzioni per l'installazione, l'uso e la
manutenzione
IT
Installation, use and maintenance instruction
manual
EN
BTL 14
BTL 20
BTL 26
ISTRUZIONI ORIGINALI (IT)
ORIGINAL INSTRUCTIONS (IT)
0006080871_202001

Summary

Safety and General Information

Warnings for Use in Safety Conditions

Critical safety guidelines to prevent injury and damage during product operation.

General Warnings

Important operational guidelines and user restrictions for safe equipment use.

Technical Specifications and Components

Technical Specifications

Detailed technical parameters for various burner models including flow, power, and voltage.

Component Description

Identifies and describes the main components of the burner assembly.

Installation and Connections

Burner Connection to the Boiler

Instructions on how to mechanically attach the burner to the boiler.

Hydraulic Connections

Details the necessary steps and considerations for fuel line connections.

Electrical Connections

Guidelines for safe and proper electrical wiring and power supply connections.

Operation, Control, and Troubleshooting

Operating Description

Explains the automatic operation sequence and safety lock-out functions.

Starting Up and Regulation

Steps and checks required for initial burner start-up and system regulation.

Malfunction and Lock Cause Diagnostics

Procedures to diagnose faults using visual indicators and potential causes.

Maintenance and Technical Diagrams

Maintenance

General procedures for cleaning and inspecting burner components.

Nozzle Flow Rate Table

Table correlating nozzle size, pump pressure, and fuel flow rate.

Wiring Diagrams

Electrical schematics showing connections for burner components.

baltur BTL 20 Specifications

General

Power Supply	230V/50Hz
Electrical Protection	IP40
Efficiency	Up to 92%
Ignition Type	Electronic
Fuel Type	Gas