B&C Electronics PH 7685/E – Rev. B
- 32 -
5.ò ç to select the value.
6.£ to confirm and to go to the delay time selection.
1.0s: actual delay time
ù to stop the procedure and to go back to ·D5·
7.ò ç to insert the value
8.£ to confirm and to go back to ·D5·
MESSAGE FUNCTION
the new data have been memorized
IMPORTANT NOTE:
during the calibration procedure the microprocessor turn the unit to the main Display if no
keys have been pressed within 5 minutes.
CAL AL D: 1.0s
UPDATE
To Next Page
