B&C PH 7685 - Alarm Relay Contact Function; New Access Number

B&C Electronics PH 7685/E – Rev. B
- 40 -
5.4.16 Alarm relay contact function
Two possible alternatives:
ACT: active alarm = relay activated
DEA: active alarm = relay deactivated
Active keys: ù - ò ç - £
5.4.17 New access number
NO : access number changing not required
YES: access number changing required
Active keys: ù - ò ç - £
Two possible alternatives A or B.
A. "NO" The unit will go back to the Configuration Display; the operator may
verify the parameter setting before leaving the Configuration sequences
which is now protected by access number.
B. "YES" The unit is now ready to the new access number selection
Active keys: ù - ò ç - £
AL RELAY: ACT
AL RELAY: DEA
Change Nr: NO
Change Nr: YES
New Nr: 0