B&C Electronics PH 7685/E – Rev. B
- 41 -
The instrument ask the operator to insert again the new access number.
Active keys: ù - ò ç - £
The double insertion of the new code assure the memorization of the
right code.
As soon as the new code is memorized the message "UPDATE" will
appear.
Should the operator insert two different numbers, the instrument will not
modify the access number and the message "NO UPDATE" will be
shown.
£ press several time the key to verify the selected parameters selected
before leaving the Configuration routine.
Confirm Nr: 0
To Next Page
