To Next PageTo Next Page
Need help?Do you have a question about the B&C CL 7685 and is the answer not in the manual?
General| Brand | B&C |
|---|---|
| Model | CL 7685 |
| Category | Controller |
| Language | English |
Details the instrument's input, temperature compensation, measuring ranges, analog output, and control relays for various applications.
Specifies selectable actions, set-point values, hysteresis, activation delay, and functions for Set-points A and B control.
Defines high/low alarm values, delay, alarm conditions for set-points, and relay contact type for monitoring.
Details the cleaning function action, auto clean timing, hold time, and relay contacts for automated maintenance.
Details the electrical connections for power supply, sensor input, and output connections using terminal strips for proper setup.
Guides through zero and sensitivity calibration procedures essential for ensuring accurate sensor readings.
Details the procedures for both automatic and manual temperature calibration to ensure accurate temperature compensation.
Describes the process for inserting set-point values and parameters for On/Off, PFM, and PWM control functions.
Explains how to set minimum/maximum alarm values and delay times to configure critical monitoring thresholds.
Covers the calibration of the cleaning function, including manual and automatic modes, and timing for automated maintenance.
Enables or disables alarm functions for Set-Point A and sets the activation time for timely alerts.
Enables or disables alarm functions for Set-Point B and sets the activation time for timely alerts.
Allows selection of the cleaning function mode: Disabled, Manual Clean, or Auto Clean for automated maintenance.
Explains zero cell calibration for dark current compensation and sensitivity calibration using lab analysis for accuracy.
