B&C CL 7685 - Access Number

B&C Electronics CL 7685
Operator’s Manual - Rev. C - 05/05
- 33 –
7.3 ACCESS NUMBER
_
|Access Nr.: 0 | access number request
[MODE] to go to D8
1. [/\] [\/] to insert the access number (when keeping the key pressed the number
will scroll with 3 speed level)
2. [ENT] to confirm and to proceed with the configuration
IMPORTANT NOTE: any inserted number different from the right access code, will allow the
visualization of the parameters and not the modification.
_
|'Cal Inhibition'
| Configuration inhibited
7.4 TYPE OF MEASURING
_ _
|Input source:Cl2| |Input source:ClO2|
_
|Input source:O3 |
Active keys: [MODE] - [/\] [\/] - [ENT]
7.5 INPUT RANGE
It's possible to select the scale 20 PPM 2 PPM
_ _
|Range: 20.00ppm | |Range: 2.000ppm |
Active keys: [MODE] - [/\] [\/] - [ENT]
7.6 AUTO RANGE
_ _
|Autoranging:OFF | |Autoranging:ON |
Active keys: [MODE] - [/\] [\/] - [ENT]
7.7 SOFTWARE FILTER
_
|SW 90% RT: 15.0s|
Active keys: [MODE] - [/\] [\/] - [ENT]