Autopilot Control Devices (B&G Triton Pilot, H5000
Pilot Controller and Zeus
2
Multifunction Display)
! Point out which onboard devices can be used to control the autopilot
! Demonstrate how to engage the pilot to steer to a compass heading, to a wind
angle and to a waypoint
! Show how to minimize the pop up pilot display window on the MultiFunction
Display (press X on the MFD after the autopilot is engaged)
Instrument and Autopilot Display (B&G
Triton Display, H5000 Displays, HV
Displays)
! Explain the purpose of the buttons on the Triton or H5000
display
! Scroll through main instrument displays using the Pages key
! Demonstrate how to control the HV display from a Triton or
H5000 instrument.
! Show how to dim the display at night (dims all other
displays)
! Point out location of speed transducer and how to clean it if
it becomes fouled.
Vessels with H5000 CPU
! Explain that advanced features of H5000 can be set via the
web server integrated in the CPU. Can be accessed by
connecting a standard ethernet cable between the CPU and a
PC or wirelessly if the network has GoFree WiFi
! The IP address for wireless access can be found using the
H5000 Graphic. SYSTEM>NETWORK>H5000/CPU/Info
VHF
! Explain that the vessels MMSI must be entered into the
VHF and NAIS400 (if installed) as this will fully enable
their safety features.
! Demonstrate intercom function if applicable.
! Show the AIS display (press AIS on the VHF)
To Previous Page
Loading...
Need help?
General
