Need help?Do you have a question about the BandLuxe R550 Series and is the answer not in the manual?
Displays comprehensive statistics for the router's current status and network information.
Provides detailed system information, including model name, firmware versions, and local time.
Shows current network connection details, including WAN assignment and DNS addresses.
Displays mobile internet connection status, signal quality, and SIM card information.
Allows configuration of general system settings, language, and time synchronization.
Configures local time, hostname, and time zone for the router.
Configures NTP client for automatic time synchronization with network time servers.
Allows changing the router's login password for enhanced security.
Specifies whether to allow or deny remote access to the router's configuration interface.
Restores the router to its original factory default settings.
Updates the router's firmware by uploading a new sysupgrade-compatible image.
Restarts the router's operating system to apply changes or resolve issues.
Configures Dynamic DNS service to map a domain name to a dynamic IP address.
Allows configuration of different network interfaces like LAN and WAN.
Configures network interface settings such as protocol, IP address, and netmask.
Adjusts firewall rules and assigns interfaces to firewall zones for network security.
Configures WWAN (Wireless Wide Area Network) settings, including roaming and APN.
Manages SIM card PIN status, protection, and PIN code verification.
Selects the preferred mobile network type (e.g., LTE, WCDMA, GSM).
Configures the DHCP server, IP address range, and lease time for network clients.
Assigns fixed IP addresses and hostnames to specific DHCP clients.
Allows or blocks VPN traffic (IPSec, PPTP, L2TP) through the router.
Configures wireless network status, channel, and security settings.
Sets up encryption methods like WPA2-PSK, WEP, and WPA-PSK for WiFi security.
Configures Wi-Fi Protected Setup (WPS) for quick connection setup.
Sets up public services by forwarding specific ports to internal IP addresses.
Adjusts firewall, internet filter, and web filter settings for network security.
Discards data from specific IP addresses by creating IP filtering rules.
Provides tools like Ping, Traceroute, and Nslookup for network analysis.
Checks the status of a connection by sending ICMP echo requests.
Checks the performance of a connection by tracing the route to a destination.
Allows writing and sending new SMS messages to a recipient.
Receives and displays incoming SMS messages.
Reviews and sends SMS messages that have been previously saved as drafts.
Provides a quick guide for initial setup and basic operations.
Offers a comprehensive guide to the product's features and usage.
General| Category | Network Router |
|---|---|
| Model | R550 Series |
| Frequency Band | 2.4 GHz |
| Max Data Rate | 150 Mbps |
| Security | WEP, WPA, WPA2 |
| Power Supply | 5V DC, 1A |
| Wireless Standard | IEEE 802.11b/g/n |
| Data Link Protocol | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Cellular Protocol | UMTS |
| Antenna | Internal |
To Next Page
