B&R 4PP065.0571-B00 User Manual

4PP065.0571-B00
Technical documentation
Version: 1.00 (July 2013)
Model no.: 4PP065.0571-B00
All information contained in this manual is current as of its creation/publication. B&R reserves the right to change
the contents of this manual without notice. The information contained herein is believed to be accurate as of
the date of publication; however, Bernecker + Rainer Industrie-Elektronik Ges.m.b.H. makes no warranty, ex-
pressed or implied, with regard to the products or documentation contained within this manual. In addition,
Bernecker + Rainer Industrie-Elektronik Ges.m.b.H. shall not be liable for any incidental or consequential damages
in connection with or arising from the furnishing, performance or use of the product(s) in this documentation. Soft-
ware names, hardware names and trademarks are registered by their respective companies.

B&R 4PP065.0571-B00 Specifications

General

Display Type	TFT LCD
Resolution	640 x 480 pixels
Power Supply	24 V DC
Brightness	400 cd/m²
Communication Interface	Ethernet, RS232
Mounting	Panel Mount
Product Series	Power Panel
Display Size	5.7 inches
Touchscreen	Yes
Interfaces	USB, Ethernet
Operating Temperature	0°C to 50°C
Storage Temperature	-20 to 60 °C
Protection Class	IP65
Power Consumption	15 W

Summary

1 Views

2 General Information

2.1 Product Overview

Details model number, description, and key product modifications.

2.1.2 Version Information

Lists the document version, release date, and responsible personnel.

2.1.3 Supported Interface Modules

Specifies Automation Runtime versions compatible with interface modules.

3 Fully Assembled Device - Technical Data

3.1 Diagnostic LEDs

Explains the function and behavior of the diagnostic LEDs on the device.

3.2 Connection Elements

Overview of all physical connection ports and their specifications.

3.3 Technical Data

Comprehensive list of technical specifications for the device.

3.4 Device Dimensions

Provides detailed diagrams and measurements of the device for installation.

3.5 Cutout Installation

Specifies the dimensions required for cutout installations of the device.

3.6 Panel Overlay Design

Illustrates the design and color specifications of the panel overlay.

3.7 Slide-in Labels

Shows the design and color of the slide-in labels for function keys.

4 Commissioning

4.1 Mounting Instructions

Details how to mount the Power Panel, including retaining clips and air circulation spacing.

4.2 Mounting Orientation

Illustrates the approved orientations for installing the Power Panel device.

4.3 Interface Module Installation

Step-by-step guide for installing interface modules into the Power Panel.

4.4 Touch Screen Calibration

Explains the hardware calibration process for touch screens.

4.5 Screen Rotation

Describes how to rotate screen content using the graphic driver's function.

5 Maintenance

5.1 Cleaning Procedures

Provides safety precautions and methods for cleaning the Power Panel.

5.2 Battery Status and Replacement

Covers battery status evaluation and the procedure for replacing the device battery.

5.3 CompactFlash Card Handling

Instructions for removing and inserting the CompactFlash card into the device.

5.4 Preventing Screen Burn-in

Explains screen burn-in on LCD/TFT displays and how to avoid it.