Bang & Olufsen BeoLab 2000 User Manual

BEOLAB 2000
1
The BeoLab 2000 gives your main
Bang & Olufsen system an extra
dimension.
Now you can play any audio or video
source you like in your main system
and listen to it – via your BeoLink
installation – in the room with your
BeoLab 2000.
But this is not all. You can even
control the daily playback functions
in your main system via the BeoLab
2000.
This guide explains how...
User’s guide

Bang & Olufsen BeoLab 2000 Specifications

General

Cabinet Principle	Bass reflex
Sensitivity	88 dB
Power Handling	100 W
Type	Active speaker
Drivers	1 x 4" woofer 1 x 3/4" tweeter
Impedance	4 Ω

Summary

Nice to know about BeoLab 2000

Music in other rooms

Explains how BeoLab 2000 adds an extra dimension to your Bang & Olufsen system by allowing music playback in other rooms.

Close-up operation of BeoLab 2000

Sound control

Details how to switch on the BeoLab 2000 and select audio sources directly using its operation panel buttons.

Volume adjustment

Explains how to adjust the volume level on the BeoLab 2000 independently of the main system.

Timer Play control

Describes how to include the BeoLab 2000 in your main system's Timer Play programming for automatic playback.

Remote operation with Beo4

Using the Beo4 remote control

Introduces the Beo4 remote control for full benefit of BeoLab 2000 features and controlling the main system.

Controlling your main system

Explains how to switch sources, adjust volume, and navigate tracks using the Beo4 remote via BeoLab 2000.

Beo4 extra functions

Covers advanced Beo4 remote functions like tape turning, sound control, random playback, and secondary source selection.

Presetting the volume level

Guides on how to set a preferred default volume level for the BeoLab 2000 using the Beo4 remote control.