Need help?Do you have a question about the Bang & Olufsen BeoLab 3 and is the answer not in the manual?
General| Type | Active speaker |
|---|---|
| Amplifiers | 2 |
| Cabinet principle | Bass reflex |
| Acoustic Lens Technology | Yes |
| Input Impedance | 10 kΩ |
| Tweeter | 19.05 mm |
| Connections | RCA |
| Signal-to-Noise Ratio | 90 dB |
| Woofer | 101.6 mm |
| Driver Units | 2-way system: 5.25" woofer, 0.75" dome tweeter with acoustic lens |
Cautions against electric shock, opening the unit, and exposing it to moisture.
Explains symbols for dangerous voltage and important instructions, plus notes on hearing damage.
Thermal protection system prevents overheating, switches to standby with a yellow light.
Controls system power, indicator lights show status (green, red, yellow for errors).
Use a soft, lint-free cloth dipped in lukewarm water and wrung firmly.
A specific warning not to touch the top speaker membrane to avoid damage.
Steps for connecting and setting up the loudspeaker, along with important placement and handling cautions.
Guidelines for loudspeaker height and direction for optimal sound, and details on mounting hole usage.
Overview of switches and sockets, and instructions for connecting to different audio systems.
Details on connecting Power Link cables, including methods and cable type recommendations.
Explanation of the three POSITION switch settings (FREE, WALL, CORNER) based on placement.
Visual guide illustrating room placement settings (FREE, WALL, CORNER) for optimal sound.
Illustrates various room setups and corresponding POSITION switch settings, plus subwoofer connection advice.
Notes on compliance with US FCC rules and Canadian Interference-Causing Equipment Regulations.
Statement regarding technical specifications, features, and potential changes without prior notice.
To Next Page