Need help?Do you have a question about the Bang & Olufsen BeoLab 3500 and is the answer not in the manual?
General| Type | Active loudspeaker |
|---|---|
| Power amplifier modules | 2 |
| Long-term max. output power per module | 50 W |
| Cabinet principle | Bass reflex |
| Woofer | 4 inches |
| Tweeter | 3/4 inches |
| Inputs | Line in, Digital in |
| Weight | 8.5 kg |
| Amplifier Power | 100 W |
| Power Output | 100 W |
| Connections | RCA |
Operate audio and video sources in your main system via Beo4.
Perform advanced operations like rewinding, track selection, and playback control.
Adjust audio volume and mute the BeoLab 3500 speakers.
Modify sound balance, bass, and treble frequencies for desired audio.
Activate or deactivate the loudness function for enhanced sound.
Save current sound settings as permanent preferences.
Set a specific time for the BeoLab 3500 to wake you up.
Re-use a previously set wake-up timer.
Exit the timer setup without saving changes.
Remove a stored wake-up timer from the system.
Include BeoLab 3500 in automatic Timer Play programming.
Listen to current sources or mute the BeoLab 3500 speakers.
Understand the status information shown on the BeoLab 3500 display.
Configure display modes such as Clock 1, Clock 2, or No Clock.
Displays for radio, tape, CD, TV, satellite, and record player sources.
Displays indicating tape rewinding, fast-forwarding, and disc loading.
Indicators for recording progress and potential interruptions.
Operate audio/video sources and playback functions with Beolink 1000.
Adjust sound levels and set wake-up timers using Beolink 1000.
To Next Page
