Need help?Do you have a question about the Bang & Olufsen BeoLab 3000 and is the answer not in the manual?
General| Weight | 9.7 kg |
|---|---|
| Model | BeoLab 3000 |
| Cabinet principle | Bass Reflex |
| Type | Active speaker |
| Frequency Response | 50 - 20, 000 Hz |
| Drivers | 1 x 1" tweeter |
| Frequency range | 50 - 20, 000 Hz |
| Tweeter | 1" |
Identifies wire colours for correct mains connection in the UK.
Covers US electrical safety warnings and FCC interference guidelines.
Details how wall mounting enhances bass response and overall speaker performance.
Guides on drilling holes and fastening the wall bracket securely.
Advises using lag screws into studs for drywall mounting in the USA.
Explains using POWER LINK sockets for connecting to Bang & Olufsen receivers, TVs, or MCL units.
Details connecting via SPEAKER LINK or LINE IN sockets to non-B&O receivers.
Explains setting the mode switch for different connection types and automatic standby behaviour.
Describes how the speaker displays source information when connected via POWER LINK.
Explains various status readings related to recording, like pause, in progress, and errors.
Lists available optional cables and adapters for connecting the speaker.
Outlines the product guarantee, its scope, and requirements for service.
To Next Page