This manual describes the Bang & Olufsen BeoLink
with particular reference to the installation requirements. The manual is
therefore of special interest to dealers and installers.
The installation of all products, whether stereo equipment, PC’s, natural gas
equipment etc., used in systems (networks), makes it necessary to meet
certain connection requirements. These requirements serve to ensure the
best possible use of the system once connected.
This also applies to the Bang & Olufsen BeoLink system. There are not too
many of these system requirements, but it is important that you are familiar
with them, as meeting the basic requirements is often what ultimately
determines whether the system works correctly once the installation has
The manual provides a short and precise introduction to the basic rules that
need to be observed when installing BeoLink, and describes how you
achieve compatibility between Master Link products and Master Control
The manual is to some extent structured as a reference work, but it it
to give you a complete overview. Only then
will it be suitable for use as a reference work.
To Next Page
Loading...
Need help?
General
