Below you can nd descriptions of the Master Link products and accessories
supplied with them, together with details of how they are used.
BeoLab 3500 is an integrated active link room loudspeaker with right and
left sound channels. BeoLab 3500 has a Master Link (ML) connection,
IR receiver and display. BeoLab 3500 also has a Master Control Link (MCL)
connection. Finally there is a built-in time display in BeoLab 3500.
BeoLab 3500 is supplied with a mains cable and ttings for wall mounting.
BeoLab 3500 is used in link rooms where an integrated active loudspeaker
is to be used. BeoLab 3500 enables you to listen to and operate all sources
in the main room, both audio and video sources.
BeoLab 3500 has a built-in sound control circuit, allowing volume and
sound adjustment to be performed individually in relation to the main
The sound adjustment facilitates individual adjustment of balance, bass,
BeoLab 3500 has the following local control options:
In addition to the accessories supplied, the installation may require a
Master Link cable and plugs, sockets and junction boxes (see also section on
installation types, page 23).
1160611 Table stand for positioning on shelf/table ( at surface).
To Next Page
Loading...
Need help?
General
