Need help?Do you have a question about the Bang & Olufsen BeoPlay H8 and is the answer not in the manual?
General| Battery capacity | 800 mAh |
|---|---|
| Battery recharge time | 3 h |
| Continuous audio playback time | 16 h |
| Impedance | 30 Ω |
| Driver type | Dynamic |
| Driver unit | 40 mm |
| Ear coupling | Circumaural |
| Headphone frequency | 20 - 22000 Hz |
| Maximum input power | 240 mW |
| Product color | Brown |
| Wearing style | Head-band |
| Volume control | Digital |
| Detachable cable | Yes |
| Recommended usage | Calls/Music |
| Quantity | 1 |
| Cables included | Audio (3.5mm), USB |
| Wireless receiver interface | 3.5 mm |
| Bluetooth version | 4.0 |
| Bluetooth profiles | A2DP, AVRCP, HFP, HSP |
| Connectivity technology | Wired & Wireless |
| Material | Aluminium, Fabric, Leather, Plastic |
| Extension cable length | 1.2 m |
| Microphone type | Built-in |
Weight and Dimensions| Width | 180 mm |
|---|---|
| Height | 190 mm |
| Weight | 255 g |
Move switch to the top position and hold for 2 sec. to initiate Bluetooth pairing.
Move the switch to the top position and release to activate Bluetooth.
Move the switch to the top position and release again to deactivate Bluetooth.
Swipe from top to bottom to deactivate ANC.
Swipe from bottom to top to activate ANC.
Plug in the enclosed mini-jack cable to use the headphones if you are not allowed to use Bluetooth or if the battery is discharged.
Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
To Next Page
