Banner Q5XKLAF2000-Q8 - Select the TEACH Mode Using the Remote Input

1x
2x
Teach Selection
Starts selected Teach (same function as pressing Teach Button for > 2 sec)
1x
Second pulse completes Teach (Two-point, Dynamic Teach and Dual Mode only)
0.04 seconds < T < 0.8 seconds
Timing between Pulse groups > 1 second
Pulse Timing (T)
Input Wire Function = Set
Gray wire is remote teach input
2x
1x
Two-point static background suppression
Dynamic background suppression
4x
3x
One-point window (foreground suppression)
One-point background suppression
5x
Dual, intensity + distance
4x
2x
1x
Button Unlock (uloc)
3x
Operator Lock (OLoc)
Button Lock (loc)
Button Lock
8x
Reset to Factory Defaults (maintain remote input = SET)
Remote
Input
Figure 19. Remote Input Map
3.4.1 Select the TEACH Mode Using the Remote Input
1. Access the TEACH selection.
Action
Result
Double-pulse the remote input.
T T
T
displays.
2. Select the desired TEACH mode.
Action
Result
Pulse
s
TEACH Mode
1
T
Two-point static background
suppression
2
T T
T
Dynamic background suppression
3
T T
T
T
T
One-point window (foreground
suppression)
4
T T
T T T
T T
One-point background
suppression
5
T T
T
T
T
T
T
T
T
Dual (intensity + distance)
The selected TEACH method displays for a
few seconds and the sensor returns to Run
mode.
Q5X Laser Triangulation Sensor with Background Suppression
www.bannerengineering.com - Tel: +1.763.544.3164 19