Bantam e-STATION BC8DX

Need help?

Do you have a question about the Bantam e-STATION BC8DX and is the answer not in the manual?

Summary

Special Features Overview

Operating Software

Details the charger's operating program for safety and user interface.

High-Power Dual Output Circuit

Describes the dual independent outputs and efficient cooling system.

Dual Individual Voltage Balancer

Highlights built-in individual cell balancers for Lithium batteries.

Maximum Safety Features

Covers delta-peak sensitivity, current/capacity/temperature limits.

PC Based Analysis

Details PC connectivity for battery data analysis.

Exterior of the Charger

Control Panel Overview

Identifies physical components: LCD, buttons, and ports.

Button Functions

Explains the operation of each button on the charger.

Warnings and Safety Notes

General Precautions

Covers unsupervised charging, environmental factors, and safe placement.

Battery Type Specifics

Details voltage, current, and cut-off levels for various battery types.

Prohibited Battery Types

Lists battery types that should not be charged or discharged.

Charging and Discharging Procedures

Before Charge Operation Checks

Emphasizes checks for battery type, current, and connections.

Charging Process

Guides on connecting batteries and verifying charge parameters.

Discharging Process

Covers discharge purpose, voltage limits, and memory effect.

Program Flow Charts

LiPo;LiFe;Lilo Program Flow

Visualizes program selection for Lithium battery types.

NiCd;NiMH Program Flow

Visualizes program selection for NiCd and NiMH batteries.

Pb Battery and User Setup Flow Charts

Pb (Lead-acid) Program Flow

Visualizes program selection for Lead-acid batteries.

User Setup Program Flow

Visualizes the program selection for user configuration.

Initial Operation and Setup

First Display and Self-Test

Explains the initial startup display and balancer circuit self-test.

Initial Parameter Setup

Guides on setting initial parameters like input voltage, temp mode.

User Setup Options Details

Setup Parameter Descriptions

Details 'In Vol. Low', 'Temp. Mode', 'Key Beep', 'Melody/Full', 'LCD Light'.

Advanced Setup Options

Covers 'LCD Contrast', 'Factory setup', 'Password', and 'Name'.

Lithium Battery Programs

Charging Lithium Battery

Details the steps and parameters for charging Lithium batteries.

Lithium Battery Charging Details

Charge Mode Options

Explains Normal, Balance, and FAST charge modes.

End Current and Check Time

Details setting termination current and cell-count verification time.

Lithium Battery Storage and Discharge

STORAGE Program for Lithium Battery

Explains the storage program for Lithium batteries.

Discharging Lithium Battery

Details discharge current, voltage, and mode settings.

Battery Safety Programs and Charging Methods

Safety Programs Overview

Explains Max. Capacity, Safety Timer, and Safety Temperature features.

CC;CV Charging Process

Details the Constant Current/Constant Voltage charging method.

NiMH;NiCd Battery Programs

Charging NiCd;NiMH Battery

Details parameters for charging NiCd and NiMH batteries.

NiMH;NiCd Charging Parameters

Current Mode and Delta-Peak

Explains current modes and delta-peak sensitivity settings.

Trickle Charge and Peak Delay

Details trickle charge and peak delay functions.

NiCd;NiMH Discharging and Cycling

Discharging NiCd;NiMH Battery

Details discharge settings for NiCd and NiMH batteries.

Charge-to-Discharge Cycles

Explains the cycle function for battery maintenance.

Pb (Lead-acid) Battery Program

Pb Battery Charging

Details charging parameters for lead-acid batteries.

Pb Battery Discharging and Dual Output Usage

Discharging Pb Battery

Details discharge settings for lead-acid batteries.

Using Both Outputs

Explains how to use both output channels simultaneously.

Screen Displays During Operation

Process Display Overview

Explains the information shown on the LCD during operation.

Detailed Display Screens

Describes specific displays like cell voltages, input voltage, and temperature.

Data Review After Process

Reviewing Process Data

Guides on accessing and understanding stored charge/discharge data.

Cell Voltage Review

Explains how to review individual cell voltages for Lixx batteries.

Warning and Error Messages

Connection and Polarity Errors

Lists errors related to battery connection and polarity.

Charger and Battery Errors

Covers errors like over-temperature, connection breaks, and voltage issues.

Balancer and Communication Errors

Lists errors related to the balancer circuit and data communication.

Glossary of Terms

Technical Definitions

Defines units and terms like Amps, mAh, Ah, Nominal voltage, and C-rating.

Maximum Circuit Power Chart

Power Limits by Battery Type

Shows charge/discharge current limits based on battery type and cell count.

Specifications and Warranty

Product Specifications

Lists key technical specifications of the charger.

Warranty and Service Information

Details the product warranty and contact information.