FOR CORNER OR END INSTALLATIONS
If your skimmer or wall vacuum fitting is located at the corner or end of your pool,
use enough hose sections to reach the farthest point in the pool, plus one (1) section.
FOR CENTER INSTALLATIONS
If your skimmer or wall vacuum fitting is located at the center of your pool,
use enough hose sections to reach the farthest point in the pool, plus two (2) sections.
Note: You may not use all or you may need more hose sections,
with either installation method, depending upon your pool size.
7
HOSE ASSEMBLY
SKIMMER / WALL
VACUUM FITTING
SKIMMER / WALL
VACUUM
FITTING
SKIMMER / WALL
VACUUM FITTING
SKIMMER / WALL
VACUUM FITTING
To Next Page
Loading...
