Baratza Encore ESP - Grinding Operation

®
January 2023 (v1.0)
6
ENCORE ESP™ OPERATIONS MANUAL
GRINDING OPERATION
1. Rotate the hopper so the grind setting indicator (3) is aligned with the desired grind setting (6).
2. When making grind adjustments, the grinder must either be running or completely empty of beans to prevent damage to the unit.
3. If grinding for espresso, the included espresso dosing cup (9) and 58mm adapter ring (8) allow for easy transfer of coee into a 54mm or
58mm portailter.
• If using a 54mm portailter, remove the adapter ring before dosing.
• Grind into the dosing cup, it the portailter upside-down on top of the dosing cup, and, keeping them together, lip both over to
seamlessly dose the grounds into the portailter basket.
4. To begin grinding, either the on/o switch or the pulse button can be used:
• To use the on/o switch, rotate it to the “I” position to start grinding, and to the “O” position to stop. Do not leave the grinder
unattended while grinding. If the ground coee surpasses the maximum ill line on the grounds bin, the grinder may become clogged
and damaged as a result.
• To use the pulse button to grind small amounts of coee, or to have more precise control in how much coee is ground, simply press
and hold the pulse button. The grinder will run for as long as the button is held down, and will stop when the button is released.