Need help?Do you have a question about the Baratza Encore and is the answer not in the manual?
Details the 40mm conical burrs manufactured in Europe for consistent coffee grinding.
Explains the 40 distinct settings for adjusting grind size from Espresso to French Press.
Describes the powerful DC motor's efficiency, quiet operation, and thermal safety device.
Guide on rotating the hopper to select the desired grind size for various brew processes.
Instructions on safely rotating the On/Off switch without causing damage.
Details on using the front button for short-duration grinding directly into a basket.
Step-by-step guide on how to remove the bean hopper from the grinder.
Instructions on safely removing the ring burr using the lifting tabs.
Procedure for washing the grounds bin, hopper, and hopper lid in warm soapy water.
Guidance on correctly replacing the ring burr and its silicone seal.
Steps to properly reattach the bean hopper to the grinder housing.
Troubleshooting steps for a grinder clogged with coffee powder.
Method for thorough cleaning using biodegradable grinder cleaning tablets.
General| Grind Settings | 40 |
|---|---|
| Burr Type | Conical |
| Burr Size | 40mm |
| Hopper Capacity | 8 oz (227 g) |
| Grounds Bin Capacity | 5 oz (142 g) |
| Speed to Grind | 0.8 to 1.1 g/sec |
| Warranty | 1 year |
| Dimensions | 4.7 x 6.3 x 13.8 inches (12 x 16 x 35 cm) |
| Power | 50/60 Hz, 1 Amp |
| Material | Plastic |
To Next Page
