Encore
TM
Manual
HCT CU KV YKNN IQ 4GRNCEG VJG DWTT D[
lining up the red tab on the burr with
the rectangular cutout on the black
CFLWUVOGPV TKPI 9KIING CPF RWUJ
FQYPƓTON[QPVJGTKPIDWTTVQGPUWTG
VJCV KV UGCVU RTQRGTN[ #HVGT TGRNCEKPI
the burr, replace the silicone seal by
lining up the two slots in the silicone
seal with the small tabs on the top of
the ring burr and slide the seal onto
the ring burr.
Replacing the Bean
Hopper
To replace the bean hopper, line up
the two small tabs on the base of the
hopper with their respective slots in
the top of the grinder housing and
insert the hopper into the grinder.
Once the hopper is in place, rotate it
clockwise.
To Next Page
Loading...
