Baratza VIRTUOSO+ Initial Setup

Rev 05/29/2019 (v1)
WWW.BARATZA.COM
VIRTUOSO+™
Parts Identication
1. Hopper Lid
2. Bean Hopper
3. Grind Setting indicator
4. Black Silicone Gasket*
5. Removable Ring Burr
6. Grind Adjustment Scale
7. LED Display
8. Dial
9. Grounds Bin with Max Fill Line
10. Brush*
11. Weighted Base
12. Grind Adjustment Ring
13. Adjustment Ring Tab
14. Burr Alignment
& Lifting Tabs
15. Center Cone Burr
* included in grounds bin
INITIAL SETUP
For the full manual, visit baratza.com/documentation
1. Hand-wash the hopper lid (1), hopper (2), black silicone
gasket (4), and ground coffee bin (9) in warm, soapy
water, and dry thoroughly. Do not wash the removable
ring burr (5) in water or it will rust.
2. The ring burr (5) has a red tab and it should be pointing
to grind setting 30.
3. Be careful not to tear the gasket. Place the gasket
(4) on top of the ring burr (5), align the gasket notches
with the ring burr tabs (one of which is red) and gently
work the gasket down until it is seated on the top 1⁄8”
(4mm) of the ring burr (5).
4. To install the hopper, ensure the silver grind setting
indicator (3) is positioned to the right, and aligned with
the black triangle marker on the case. Press the hopper
down and twist clockwise to setting 20. You should
hear the hopper click as it rotates.
If Step 4 is not working well: The black grind adjustment
ring (12) must be rotated fully counterclockwise for the
hopper to install. You can rotate the grind adjustment
ring (12) by hand, using the adjustment ring tabs (13) for
leverage, if needed and then continue from step 3.
2
11
5
8
4
9
10
7
6
1
3
20
10
30
5
12
14
134
15

Baratza VIRTUOSO+ Specifications

General

Product type	Burr grinder
Product color	Black, Silver
Rotational speed	550 RPM
Built-in dispenser	-
Coffee beans capacity	230 g
Number of grinder settings	40
Adjustable grinder settings	Yes
Current	0.8 A
AC input voltage	100-120 V
AC input frequency	50 - 60 Hz

Weight and Dimensions

Depth	160 mm
Width	120 mm
Height	350 mm
Weight	3600 g