19
ECO 40 / 52 / 55
3.4. FITTING THE STOVE
3.4.1. Connecting the smoke outlet
The appliance can make use of either a top or rear connection Ø150 mm
(Ø148 mm external) for the • ue (chimney).
Smoke outlet top-connection
Factory assembled, the appliance is provided with a (detachable) smoke
outlet top-connection. This connection is intended for steel stovepipes, double/
single-skinned stainless steel (insulated) • ues or double/single-skinned • exible
stainless steel • ues.
Smoke outlet rear-connection
In order to be able to assemble the smoke outlet rear-connection, remove the
• ue gas • ap and the brake plate • rst.
See chapter 11 for the disassembly sequence: “Sequence for replacing the
interior of the appliance”.
Fit the sealing plate and the protective plate to the other opening.
Situate the appliance in such a way that the • ue gas outlet is precisely in line
under the chimney connection (niche pipe) in the ceiling (top connection) or with
the chimney connection (niche pipe) in the wall (rear connection).
To Next Page
Loading...