33
ECO 40 / 52 / 55
When setting the • re, move the locking slider all the way to the left. If necessary,
leave the door ajar for 10 minutes. Do not open the door wide, as the window
will remain cold. If the door is shut during this time, smoke will condense on the
glass and form soot. Move the air supply slider all the way to the right “ + ” only
when starting the • re.
Prevent white glow and over-fi ring.
6.3. INSTRUCTIONS WHILE STOKING
After approx. 10 minutes, the • re will be burning • ercely. You can now top it up
with a few larger blocks of wood. Move the locking slide all the way to the right
when the blocks are burning well and close the door.
Using the air supply slider you can now adjust the air supply for further
combustion. Make sure the • re burns quietly.
Note: Once you have got the • re going, leave the air supply slider in the centre
position for optimal combustion. Your • re will then be much cleaner and more
ef• cient (more heat, less topping up).
Centre position
Control range of primary air supply (by grate)
Control range of secondary and tertiary air supply
Combustion air supply slider
To Next Page
Loading...