Barbecook SIESTA 310 BLACK EDITION

Questions and Answers

A
Allison JonesAug 2, 2025
Why does my Barbecook SIESTA 310 BLACK EDITION Grill have excessive heat and/or flare-ups?
- J
  jacquelineandersonAug 2, 2025
  Flare-ups during grilling with your Barbecook Grill can happen if the food you're grilling is too fatty. To prevent this, trim excess fat from the food before grilling or set the burners to a low position. Also, check if the fat drain hole is blocked, if there's fat in the bowl, or fat on the burners. If so, clean the fat drain hole, bowl, and burners.
A
Angela ReedAug 6, 2025
How to fix not enough heat on Barbecook SIESTA 310 BLACK EDITION Grill?
- J
  Jessica SuttonAug 6, 2025
  If your Barbecook Grill isn't getting hot enough, there are several possible causes: * Ensure the gas supply is open. * Check that the venturis are correctly placed over the openings of the gas valves. * Make sure the burner openings are not blocked; clean them or replace the burners if necessary. * Verify the gas cylinder isn't empty, and replace it if needed. * Confirm the pressure regulator is properly connected to the cylinder and/or hose; reconnect if necessary.
K
kgouldAug 11, 2025
Why are there yellow flames on my Barbecook Grill by Barbecook?
- Y
  ybarnettAug 11, 2025
  Yellow flames on your Barbecook Grill can be caused by a few things. First, check if the burners or venturis are blocked and clean them if necessary. Also, make sure there's no salt on the burners; if there is, clean them. Finally, ensure that the appliance is connected to propane and is using an appropriate pressure regulator, not butane.
J
jeffrey04Aug 16, 2025
What to do if Barbecook SIESTA 310 BLACK EDITION has flash-backs (flames outside venturis/at control knobs)?
- S
  Stacey BrownAug 17, 2025
  Flash-backs (flames outside venturis/at control knobs) on your Barbecook Grill are usually caused by blocked burners or venturis. To resolve this, close the gas supply and set the burners to OFF. Let the appliance cool down completely, then clean the burners and venturis.
A
alexandershellyAug 22, 2025
What to do if Barbecook SIESTA 310 BLACK EDITION has incomplete flame?
- L
  Laura BradleyAug 22, 2025
  An incomplete flame on your Barbecook Grill is often due to a burner that is blocked, pierced, or rusted. Try cleaning the burner. If that doesn't work, you may need to replace it.
P
Paul HopkinsAug 27, 2025
Why is heat not distributed evenly over Barbecook SIESTA 310 BLACK EDITION surface?
- D
  Darryl SmithAug 27, 2025
  If the heat isn't distributed evenly over the grill surface of your Barbecook Grill, it might be because the appliance hasn't been preheated. Make sure to preheat the appliance before grilling.

Summary

EN - USER GUIDE

Register Your Appliance

Important Safety Instructions

Crucial safety guidelines covering gas handling, location selection, and general warnings for safe operation.

Assembling the Appliance

Provides step-by-step instructions and safety advice for assembling the Barbecook appliance correctly.

Connecting Gas to the Appliance

Guidance on selecting and connecting gas cylinders, hoses, and regulators, with essential safety precautions.

Lighting the Burners

Instructions for safely igniting main and side burners using the electrical igniter or a match.

Troubleshooting

A problem-solving guide addressing common issues, their causes, and recommended solutions for the barbecue.

Illustrations

Barbecook SIESTA 310 BLACK EDITION Specifications

General

Type	Gas Grill
Model	Siesta 310 Black Edition
Category	Grill
Cooking Area	2800 cm²
Burners	3
Material Cooking Grid	Cast Iron
Warming Rack	Yes
Side Burner	No
Thermometer	Yes
Electronic Ignition	Yes
Weight	47 kg
Color	Black
Power	12 kW
Material	Steel