5
A. HARDWARE PACK
Tools needed for assembly
Phillips head screwdriver (not included).
Before assembly
Please read all instructions thoroughly before proceeding.
Find a large, clean area in which to assemble your pizza oven. Please refer to the parts list and
assembly diagram as necessary.
Ensure any transit protection or packaging is removed.
Do not throw out any packaging until pizza oven is fully assembled in case parts are still
enclosed.
M6x10mm screw
40 pcs
Rubber feet
4 pcs
M4x20mm screw
4 pcs
M6 washer
8 pcs
M5x12mm screw
3 pcs
M5x35mm screw
4 pcs
Spacer
4 pcs
ARROSTO GAS PIZZA OVEN-Manual_v5.indd 5 19/12/17 1:28 pm
To Next Page
Loading...
