Barco CINE 6 - Left-Right (East-West) Adjustments

Random Access Adjustment Mode
5976381.01 BARCO CINE6 31012002 ___________________________________________________________________________ 6-13
Left - Right (East-West) Adjustments
Left - right and centre adjustments affect only the vertical lines of the projected image.
To start up the left - right and centre adjustments, follow the next procedure :
Use the arrow keys to highlight Left-Right (E-W) on the Geometry menu and then press ENTER .
Only the Green image is displayed while making left-right adjustments. The Red and Blue images will automatically be corrected
in the same manner. Convergence corrections are automatically disabled for the duration of these adjustments.
The following adjustments can be done :
- vertical centerline bow
- vertical centerline skew.
- side keystone (left and right)
- side bow (left and right).
All adjustments are indicated on the screen with the function name,
a bar scale and a value between 0 and 100.
ENTER will select Left-Right adjustment menu.
EXIT returns to the Random Access Adjustment main menu.
ADJUST returns to operational mode.
Vertical Centerline
Bow
Vertical Centerline
Skew
Side Bow
Side Keystone
Corrects for curvature of the vertical
lines in the middle of the image
Corrects for the tilting of the vertical lines
in the middle of the image
Corrects for the curvature of the vertical
lines at the sides of the image
Corrects for the tilting of the vertical
lines at the sides of the image
GEOMETRY
H - PHASE
RASTER SHIFT
LEFT-RIGHT (E-W)
TOP-BOTTOM (N-S)
H & V SIZE
V LINEARITY
BLANKING
Select with
<EXIT> to return
then <ENTER>
or
LEFT - RIGHT (E/W)
V CENTERLINE BOW
V CENTERLINE SKEW
BOW
KEYSTONE
Select with
<EXIT> to return
then <ENTER>
or