To Next PageTo Next Page
Need help?Do you have a question about the Bard PowerPICC Provena and is the answer not in the manual?
General| Brand | Bard |
|---|---|
| Model | PowerPICC Provena |
| Category | Medical Equipment |
| Language | English |
Describes the PowerPICC Provena Catheter as a family of peripherally inserted central catheters.
Outlines the intended use of the PowerPICC Provena Catheter for short/long term peripheral access.
Lists the available catheter sizes and their maximum flow rates.
Lists conditions where the use of the PowerPICC Provena Catheter is not recommended.
Details general precautions for handling, storage, and potential complications.
Covers specific safety considerations during catheter placement.
Highlights risks and precautions related to power injection procedures.
Addresses warnings specific to the Sherlock™ TLS stylet for tip location.
Outlines general precautions for sterilization, use, and handling of the device.
Details precautions to be taken during the catheter insertion process.
Lists potential serious complications associated with catheter use.
Details how to select and prepare the insertion site and identify the vein.
Explains patient positioning and how to measure for catheter placement.
Guides on preparing the patient's skin for catheter insertion.
Instructions for preparing a sterile field for the insertion procedure.
Steps for pre-flushing the catheter lumens with sterile saline.
Instructions on how to cut the catheter to a specific length if needed.
Detailed steps for performing venipuncture and inserting the introducer.
Guidance on inserting and advancing the catheter into the vein.
Final steps for advancing the catheter to the correct tip position.
Procedure for removing the introducer sheath after catheter placement.
Instructions for safely removing the stylet and T-Lock assembly.
Steps for aspirating blood and flushing the catheter to confirm patency.
Guidance on securing and dressing the catheter site.
Step-by-step guide for applying the StatLock stabilization device.
Procedure for applying StatLock to single lumen catheters.
Procedure for applying StatLock to dual lumen catheters.
Instructions for using tape strips to stabilize the catheter.
Procedure for tape strip stabilization of single lumen catheters.
Procedure for tape strip stabilization of dual lumen catheters.
Confirms catheter tip placement using radiography or other technology.
Detailed steps for performing power injections with the catheter.
Provides guidance on routine maintenance and care of the catheter.
Instructions for dressing changes and cleaning the catheter exit site.
Details the procedure for flushing the catheter lumens.
Guidance on managing catheters that are occluded or partially occluded.
Instructions for using the catheter for CVP monitoring.
Step-by-step instructions for safely removing the catheter.
Explains the purpose of the Sherlock™ TLS stylet for catheter placement.
Details the composition and function of the Sherlock™ TLS stylet.
Instructions for modifying catheter length specifically when using the Sherlock™ TLS stylet.
Details the process of removing the stylet and T-lock assembly.
