1
1
2
2
3
3
How to assemble the joints and poles :
Single pole inserts:
1- Insert straight end of pole into joint
(A straight end has no step down at the popple)
2- Press down lower popple to engage
in the joint hole
3- (You may have to press the popple a
couple of times to engage fully)
Double pole inserts:
1- Insert straight end of pole (no popple)
into joint
2- Insert STEPPED end with popple into
first pole and joint together
3- (You may have to press the popple a
couple of times to engage fully)
To Next Page
Loading...
