barebones STR-556 - Step 4: BUILD 2 WALLS

Pole E
Pole B
1) Insert (E) pole into (B) pole to create upright pole.
2) Build 10 total.
3) Attach (G) joint to the top of all the (B) poles and
4) Attach (H) Foot joint to the bottom of 6 of them,
and (J) Corner joint on the bottom of 4.*
5) Join upright poles together with 4 (A) poles in the middle,
2 (B) poles on one end and 2 (E) poles on the other end.
STEP 4 : BUILD 2 WALLS
(B) Pole x 14
(E) Pole x 14
(A) Pole x 8
Parts Needed :
*Remember- (J) joints go on the bottom corners as shown.
(H) Foot joint
(J) Corner joint
AA
AA
AA
AA
BB
BB
EE
oror
EE
(G) Triangle joint x 10
(H) Foot joint x 6
(J) Corner joint x 4