18
~ Troubleshooting ~
Flow issues in one or more jets.
!
!
!
If there are no obstructions…
1
2
3
4
Rotate the jet counterclockwise to
open it.
Remove the jet from the jet body.
Check the back of the jet and the jet
line for any obstructions.
Remove a properly functioning jet of
the same size and insert it in the jet
body with the weak stream.
The jet needs replacing if a
proper stream is achieved with
the swapped jet.
If there is no stream or a weak
stream with the swapped jet then
there is likely a problem with the jet
line.
Contact Customer Support.
If the jet is already open…
To Next Page
Loading...