27
27
MODEL SR124
For more detailed information on engine maintenance and repair procedures please consult manufacturers operators and
maintenance handbooks.
Lubricant specifications
All conveyor bearings (General purpose Grease)
Make: Lubricant
MOBIL Mobilgrease MP DUCKHAMS Adamax LM2
BP Energrease L21M CASTROL Spheerol AP3
TOTAL Multis MS2 SHELL Alvana R3
ESSO Becon Q2 TEXACO Molytex 2
The above lubricant is also recommended for all folding mechanism pivot pins and should be applied as required when folding
the machine for transport.
SCREEN BOX
Your Barford SR124 machine Screen box bearings are initially supplied with SKFLGEP2 Grease Lubricant Or equivalent.
(apply 20 Grams Daily at max 12 hour intervals).
ENGINE
Consult your specific Engine manual for all lubricant specifications and maintenance intervals.
HYDRAULIC RESERVOIR
Your Barford machine hydraulic system is initially supplied with Oil Spec: ISO 46 Note: if operating in higher ambient
temperature a higher temperature specification oil may be required.
Note: It is the operators responsibility to contact Barford Equipment Ltd technical for guidance if machine is
operating in prolonged extreme ambient temperatures outside the normal range (-10 º C to +35 º C).
Never power wash around the control panels. Always abide by the safety standards when carrying out maintenance.
To Next Page