Barksdale D1T - User Manual

´ß0Electrical Ratings
Micro
switch
Special
Characteristics
Volt AC
50/60 Hz
Ind.
Load
A
Res.
Load
A
Volt DC
Ind.
Load
A
Res.
Load
A
Notes
H
Microswitch
with silver
contacts
125
250
10
10
10
10
6
to
24
0,50
0,5
Small hysteresis;
high AC / low DC
loads
M
Microswitch
with silver
contacts
125
250
10
10
10
10
12
24
250
5,00
1,00
0,25
15,0
2,0
0,4
Medium hysteresis;
high AC and DC
loads
GH
Microswitch
with gold plated
contacts for low
voltage and low
current
125
1
1
24
1,00
1,00
low change-back
values
GM
30
0.1
0.1
30
0,10
0,10
Medium hysteresis
IMPORTANT
480 V AC and 15 A only upon request
We recommend to use a prefuse of the maximum current rating from the table above according
to the load switched.
We recommend gold plated contacts for all intrinsically safe and other applications with low
voltage/power.
Operating life time
Normal expected service life (expressed in the number of cycles over the full adjustment
range) is appr. 1 million for the pressure switch. This may be extended to 2.5 million cycles
max. if only a part of the adjustment range is used (about 20%).
Switch sensor life may also be effected negatively by:
 Media not compatible with the wetted materials.
 Too high switch cycling speed or more than 20 cycles per minute.
 System cycling pressure exceeding the top of the adjustable range.
Operating Instructions
Single/Dual Metal Diaphragm Pressure Switches D1T/D2T
Single/Dual Metal Diaphragm Differential Pressure Switches DPD1T/DPD2T
1 Intended Applications .................................................................................................. 2
2 Safety Instructions ....................................................................................................... 2
3 Standards ..................................................................................................................... 3
4 Warranty/Guaranty ....................................................................................................... 3
5 Installation/Commissioning ......................................................................................... 4
6 Maintenance/Cleaning ................................................................................................. 8
7 Technical Data ............................................................................................................. 9
Barksdale GmbH
Dorn-Assenheimer Straße 27
D-61203 Reichelsheim
Phone: +49 (6035) 949-0
Fax: +49 (6035) 949-111 and 949-113
email: info@barksdale.de
Internet: www.barksdale.de
1
14
Art. no.: 923-1545
Index L, 26.08.2022
Specifications are subject to
changes without notice!

Barksdale D1T Specifications