7 Appliance Installation Guide
Introduction and Package Contents
Your new Barracuda NG Firewall F10 Rev. B is an integrated security appliance preinstalled with
Barracuda NG Firewall firmware. This winning combination offers a ready to run security solution that
is flexible, affordable and easy to deploy.
Hardware Configuration
Table 1 F10 Rev. B Hardware
Component Description
CPU VIA 500 MHz
Memory 512 MB
Flash Disk 4 GB
Form Factor Mini Desktop
Dimensions (W/D/H) 24 x 16.6 x 3 cm
Net Weight 2 kg
Power Supply Input Voltage 100 - 240 V, AC
Power Supply Output Voltage 12 V, DC
Power Supply Frequency 47 Hz - 63 Hz
Power Supply Watts 60 W
Storage Temperature -20 °C - +70 °C
Operation Temperature 0 °C - 40 °C
Relative Humidity 5% - 95%, non-condensing
Certifications CE, FCC, ROHS
The hardware configuration list in Table 1 was valid at the time this manual was published. The listed components are
subject to change at any time, as Barracuda Networks may change hardware components due to technological
progress. Therefore, the list may not reflect the current hardware configuration of the Barracuda Networks NG Firewall
or NG Control Center appliance it was delivered with.
To Next Page
Loading...